Engineering Calculation Tools

UK SAP 10.3 / SBEM EPC precheck. Maps a SAP rating to its EPC band and estimates annual CO2 and primary energy from fuel use. Indicative precheck only.

Inputs: SAP rating, floor area, annual fuel use (kWh)

Check EPBD compliance status for EU/UK buildings. Returns compliance score, applicable deadlines, Digital Renovation Passport status, remediation cost estimate, and available grants.

Inputs: building type, floor area, country, EPC rating, construction year

Calculate Power Usage Effectiveness for data centres. Returns PUE score, efficiency rating (Excellent/Good/Average/Poor), annual overhead cost, and recommendations.

Inputs: IT load (kW), cooling type, climate zone, building age

EU Energy Efficiency Directive data-centre reporting pack. Returns PUE, WUE, ERF and REF plus the in-scope reporting flag.

Inputs: IT power (kW), total & IT energy (kWh), water, renewables, reused heat

Gap assessment for engineering firms and critical infrastructure operators. Returns compliance score, gap list by Article 21, penalty exposure, and implementation timeline.

Inputs: company type, employee count, revenue, sectors, current controls

UAE Scope 1 + Scope 2 GHG estimate from electricity and gas use, with emirate-specific grid emission factors. Returns tCO2e by scope.

Inputs: emirate, electricity (kWh), gas (kWh/m3)

Check whether a property can be lawfully let under MEES, by EPC band. Returns the minimum standard in force, lawful-to-let verdict, cost cap and penalty exposure.

Inputs: property type (domestic/non-domestic), current EPC band

Screen a new residential dwelling against the simplified overheating method of Approved Document O. Returns glazing and free-area checks with a PASS/FAIL verdict.

Inputs: location risk, cross-ventilation, glazed facade, floor & glazing area

Whole-dwelling design heat loss and heat-pump sizing (MCS-aligned). Returns design heat loss (kW), recommended heat-pump output, indicative SCOP and annual demand.

Inputs: floor area, storeys, age band, location

Determine the EV charge-point or cable-route provision required for new and renovated buildings under Approved Document S. Returns charge points required and applicable provision.

Inputs: building type, works, parking spaces, dwellings

Whole-building carbon footprint (Scope 1/2/3) with a CRREM stranding check and embodied-carbon estimate. Returns intensity, stranding year and reduction roadmap.

Inputs: floor area, building type, country, energy use, refrigerants

Calculate operational and embodied carbon plus the net-zero gap for a building. Returns carbon intensity, benchmark percentile, net-zero gap and prioritised reduction measures.

Inputs: floor area, building type, country, energy use, construction year

Estimate the cooling load for a data centre or server room for HVAC and chiller sizing. Returns peak cooling load, recommended capacity and redundancy notes.

Inputs: room area, IT load (kW), set-point, climate zone

Estimate peak cooling and heating loads for building HVAC sizing. Returns peak loads, annual consumption, and HVAC equipment recommendations.

Inputs: building type, floor area, climate zone, glazing ratio, insulation spec

Check grid-connection feasibility for Dubai, Abu Dhabi, Sharjah and other emirates. Returns feasibility status, timeline, required studies, NOC requirements and cost estimate.

Inputs: emirate, load (MW), connection voltage, project type

Check UAE BIM-mandate applicability (Dubai Circular 196, Abu Dhabi DMT, Sharjah). Returns whether BIM is mandatory and the required deliverables.

Inputs: emirate, building type, floors, GFA

Assess UAE cybersecurity regulatory compliance (NESA IAS, Dubai ISR, CBUAE, TDRA). Returns applicable frameworks, gap list and priority controls.

Inputs: sector, emirate, entity type, current controls

Preliminary Eurocode beam design (steel EC3 / composite / reinforced concrete EC2). Returns bending, shear, utilisation (PASS/FAIL) and deflection check. Simplified check only.

Inputs: span, UDL, point loads, steel grade, section (e.g. IPE360)

Eurocode axial column buckling check for steel members. Returns buckling resistance, utilisation ratio (PASS/FAIL) and slenderness. Simplified check only.

Inputs: section, length, axial load, steel grade, end conditions

Parametric construction-cost benchmark across UK, EU and GCC by country, project type and specification. Returns indicative cost/m2 and range.

Inputs: country, project type, floor area, specification level

Generate an instant Technical Due Diligence quote. Returns scope, deliverables list, price breakdown, delivery timeline and booking URL.

Inputs: building type, floor area, floors, country, scope items

Engineering ROI calculator for infrastructure and efficiency upgrades. Returns payback period, NPV, IRR and annual savings.

Inputs: capex, annual saving, project life, discount rate

EPBD-style staged digital renovation passport: a 3-phase roadmap (quick wins, system upgrades, deep retrofit) with indicative costs and carbon savings.

Inputs: building type, EPC rating, floor area, systems

Building readiness assessment for change-of-use or conversion projects. Returns a readiness score and the key works required.

Inputs: building type, current use, target use, condition

DGNB certification pre-score and BIM (ISO 19650) maturity self-assessment from a 20-question form. Returns pre-score, maturity level and gaps.

Inputs: 20-question self-assessment

NIS2 / EPBD contractor vetting score from a 12-question checklist across financial, technical and compliance criteria. Returns vetting score and risk flags.

Inputs: 12-question checklist (financial, technical, compliance)

UK permitted-development rules engine (GPDO 2015, England). Returns whether works are permitted development or require a planning application.

Inputs: property type, works, location, prior changes